Detailed Product Description

LED Driver DC to DC Series,Constant Current,2 to 9W
Model: FLDxxxx-xx Dc-Dc Series Approvals :
1~9 Watts single output
Size 18 * 21 * 12 mm (L*W*H)
Features:
* For High Brightness Light-Emitting Diode products.
* DC 12V/24V input.
* Fully isolated plastic case with stripped .
* Built-in Constant Current limiting design.
* Operation from -10~40 full load.
* Protections: OVP / OLP/ SCP .
* 1 year warranty.
Specifications:
Model No.                FLD3510-12   FLD7012-12   FLD3508-24   FLD3520-24   FLD7012-24
Output  
LED Operation Voltage  3~10V.......3~12V............3~8V............3~20V............3~12V
Rated Current .......350m A±10%...650m A±10%...350m A±10%...350m A±10%...650m A±10%
Rated Max. Power...2W................9W.................2W................5W...................9W
Efficiency (Typ.)   >80%.
Rise Time   <30ms at full load
Input 
Voltage Range  Dc..10.5~13.5 V....10.5~13.5 V....Dc 22-26 V...Dc 22-26 V....Dc 22-26 V
AC Current .......0.2A@12V Dc / 0.1A@24 Dc
Protections
Over Load   100~135% rated output power   recovers aotomatically after fault condition has been removed.
Short Circuit  Type: Hiccup mode, Recovers automatically after fault condition is removed.
Over Voltage  105-120% rated output Voltage
Environment
Operation Temp.  -10~40 full load .
Operation Humidity  20% ~ 95% RH non-condensing.
Storage Temp.  -20 ~ +80
Storage Humidity   10% ~ 95% RH
Vibration   10 ~ 500 Hz, 2G 10 min. / 1 cycle, period for 60 min. each along X, Y, Z axes.
Safety&EMC 
Safety Standards   meet EN61347-1, EN61347-2-13 ,
EMI Conduction & Radiation   EN61347-2-13 ,
meet EN55015   meet EN61547, EN61000-4-2, 3, 4, 5, 6, 8, 11
Others
MTBF   400K hours min.MIL-HDBK-217F(25)
Dimension(L*W*H)   18 * 21 * 12 mm
Packing(L*W*H)/Carton  27*24*28cm:100PCS/Carton
Weight   50g
EMS Immunity
Remark
1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25 ambient temperature.
2. Constant current operation region is within the specified output voltage range above. This is the suitable operation region for LED related applications.
3. The power supplyis considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.